Windows 10 is a great operating organization, but the “Getting Windows Ready stuck” screen errors may make you unable to use your computer.

Windows 10 systems are still susceptible to random hiccups. A common problem is when Windows gets stuck on the “Preparing Windows” screen.

When this blunder occurs, there are a few gears you can do to try to fix it. But before that, let’s cover the possible immediate causes of these mistakes, so you know what to look for.

What causes the “Getting Windows ready stuck” screen to be stuck?

This can happen for many reasons: corrupted installation files, malware, or an incompatible program.

Corruption of Windows installation files is the most common cause of this problem. For example, corruption can occur when your computer restarts before Windows is fully installed.

Windows might get stuck at the “Preparing Windows” screen if malware interferes with the process during an update.

So, the most common causes for the stuck “ getting windows ready stuck” screen error is the following:

  • Corrupted system files
  • Incorrect boot device, damaged computer hardware
  • Malware infection
  • Your computer hardware isn’t compatible with Windows 10
  • Slow internet connection, network issues

Many factors may interfere with the proper functioning of our computers, including the reasons mentioned above. But some have been found to be more likely than others, leading us to many possible solutions.

How to fix “getting windows ready stuck.”

So, Windows 10 is stuck at the “Preparing Windows” screen, and you’re unsure what to do next. You can wait for Windows to finish whatever it’s doing (be patient) or fix the problem. Let’s see what steps you can take to resolve this frustrating error.

1. Wait for Windows 10 to load

The most straightforward solution is to wait. This is the approach that Microsoft support personnel recommends when they are trapped on the “Prepare Windows, do not turn off your computer.”

While the computer appears stuck, its System can perform substantive actions such as downloading and installing files, starting a Windows 10 update process or altering the application configuration.

While it works to do everything for installation, you can’t use your computer, so it seems “stuck” for a long time.

The simplest thing you can do is sit during the process. In modern computers, Windows must take between 10 and 20 minutes for an update.

However, if you install the System, the operation may take up to several hours.

Sometimes, the most significant thing you can do is to nobody. Leave your computer for a few hours and return later to see if you are still trapped on the “Preparing Windows” screen.

2. Power-reset your computer

  • Shutting down your computer will erase all data in memory but will not affect the data on your hard drive.
  • Power cycling a computer is a simple approach to troubleshooting a stuck “Preparing Windows” screen.
  • On startup, this error can occur for various reasons, like the ones we’ve discussed above, including corrupted data.
  • Doing a power reset on your device can potentially help with this. Let’s take a look at the steps required to get Windows out of the stuck screen:
  • Turn off your computer entirely by pressing the Power button. A good indicator of when it’s shut down is that the screen goes completely black, and the fans in the computer no longer spin.
  • Disconnect all peripherals such as USB flash drives, external hard drives, headphones, etc. Also, remove the power cord or adapter from your computer.
  • Remove the battery from the cordless compartment if you are using a laptop with a removable battery.
  • Hold your computer’s power button for about 30 seconds to drain any remaining charge from the capacitors.
  • Put the battery back in your laptop (if you previously removed it) and reconnect the power line to your computer. However, do not reconnect any of the USB devices yet.
  • To start your computer, press the Power button until you see the startup screen. Now you can see if the issue with Windows 10 stuck on the “Preparing Windows” screen has been resolve.

If you can access your System, you can reconnect all your peripherals and other USB devices.

3. Use System Restore or System Image Recovery

  1. Microsoft’s Media Creation Tool can be download from their website. Create a Windows installation media (USB installation drive or CD/DVD) by running it.
  2. Start your computer by inserting the bootable disk or USB you created. Click Repair your computer after setting the language, time, and keyboard method.
  3. To get out of the “Preparing Windows” loop, use the System Restore wizard and complete the steps required for a system restore. It would help if you were intelligent to return to a manually created or automatic restore point.

4. Run the System File Checker tool

Corrupted system files can cause massive problems with your operating System, including the boot loop. System File Checker (SFC) is a built-in tool to help fix issues in Windows 10.

It is capable of automatically detecting and repairing corrupted files.

Typically, you can use System File Checker through the command prompt. However, because you can’t start your computer, you have to use it through a particular path.

  1. Start your computer by inserting a bootable disk or USB you created. Click Repair your computer and then click Troubleshoot from the options.
  2. A list of advanced options will be displaye on the screen. Just select Command Prompt from here and wait for it to load. You should see a black popup on the net.
  3. Type the following command and then press the Enter key on your keyboard to run it:
  4. Wait until the system file check process completes altogether. You’ll know it’s done when the progress status reaches 100% completion. Then restart the computer to determine if the “Preparing Windows” loop still occurs.

5. Perform Windows 10 Startup Repair

Windows Startup Repair is a troubleshooting tool that can help if your computer has problems during startup.

This is an excellent place to start if you’ve been stuck in “Preparing Windows” for hours.

  1. Enter the Windows Recovery Environment (WinRE) using the Windows installation disc or USB you created.
  2. Go to “Advanced Options” in WinRE and select “Startup Repair.” This will resolve any issues preventing Windows from loading.
  3. Wait for the repair tool to finish running and see if you can start your operating system afterward.

Try another approach to fix Windows 10 stuck on the “Preparing Windows” screen if the Startup Repair process fails with the error “Startup Repair could not repair your PC” or “Automatic Repair could not repair your PC.”

6. Check your internet connection

This can help you if you recently updated Windows 10 and the System needs to complete the installation of new files.

Something may be wrong with your Internet connection, preventing Windows from downloading or verifying the files needed to boot.

There are many ways to solve internet problems; one is to reboot the router.

There is no reason not to give it a try, as all you need for this step is three easy steps, outlined below:

  1. Locate the power button on your router and turn off the device.
  2. Wait a few minutes. We recommend waiting 5 minutes to allow your router and network to shut down properly.
  3. Turn your router back on.

If you are using a wired connection, such as Ethernet, disconnect the cable and inspect it for damage.

If the cable appears intact, reconnect and see if that fixes the boot loop issue.

7. Perform a Factory Reset

You can fix the problem with a hard factory reset if nothing seems to work. Clean your computer, and install Windows 10 as if it were the first day unless you decide to keep your files!

This is one tool in the arsenal against clogged drives and other annoying issues that make computing unbearable or unusable.

“Keep My Files” is the best option for those who want to keep their documents and other personal data.

On the other hand, “Remove Everything” will ensure that all installed programs and files are remove before installing, getting windows ready stuck.

This includes any save games or settings that have changed since you installed the Operating System!

Before a factory reset, we highly recommend backing up your important files somewhere. You can back up to a resident hard drive or USB or go the cloud route.

Conclusion

This blog post provides troubleshooting steps you can follow if your Windows 10 is stuck on the ” Getting Windows Ready Stuck ” screen. We hope these tips have helped you! If not, please get in touch with our experts here at Software Keep for further assistance.

You might also want to check back with us soon, as we plan to post more helpful articles on Windows 10 and other tech topics. Interested? Check out some of our latest posts here!